Home > Read Error > Read Error 0x04

Read Error 0x04

Thanks Discussion ddumont - 2006-07-12 Logged In: YES user_id=1403050 Right.. At least that should assure you that you sucessfully made a copy of the OS to the thumb drive. The Reset line doesn't move. Do I need to copy the dmg file to the other USB or expand it to be the actual folder structure ? his comment is here

t3925.html Part H: Help for 8 GB SSD Problems . . Hmmm ... However, I noticed >> something else. There is a 10k pullup, but clearly > on my board something fights against it.

Just done a quick test and it seems to be working here. That's why you don't see any activity on the reset line. I figured "screw it" as I couldn't do anything to fix it. Cheers Spen No luck with any of the reset_config options unfortunately.

All worked just fine. It looks like it finds the chip for a while, but then it gets a read error, after which it finds it again: Info : CMSIS-DAP: FW Version = 1.0 Info I haven't used mbed at all and from a quick look, it's not obvious how to access these 'tools'. At least, that's what worked for me.

Tags: ebios read error Thor_HoG Joined: Jul 2, 2012 Messages: 31 Mobo: Gigabut GA-X79-UD5 Intel X79 CPU: LGA 2011 12-core 3.2GHz Graphics: Dual ATI 6800's Mac: , , Mobile Phone: Nov Drop the attached binary on your board. > 5. If this doesn't help, I would remake the 16gb OS image. There are a number of very, very bright and sharing people on this forum and without their time and efforts, I would never have been able to do this. (I did

Stay logged in tonymacx86.com Home Forums > The Build > Desktop Compatibility > Home Buyer's Guide Installation Guide Forum Create New Post The Build Buying Advice Desktop Compatibility General Hardware Deals Have tried the steps outlined in a number of guides, and have a couple of issues / questions: My hardware is - 1 * small USB and 1 * 16GB Sandisk There are lots and lots of messages to look through but believe me you are NOT the only one who has stumbled. because i've had the same ebios error before Back to top #3 Evgeniy Posted 18 April 2011 - 06:24 AM Evgeniy InsanelyMac Protégé Members 55 posts Plz help me : how

However, I still get the following error. Lowest price ever! I employed some hacks to cortex_a8_read_phys_memory and cortex_a8_write_phys_memory, which works for the most part, but I still some screwiness on occasion. Spen Re: [OpenOCD-devel] cmsis-dap reset problem From: Thomas Schmid - 2013-09-19 16:34:30 Attachments: Message as HTML openocd.cfg Re: [OpenOCD-devel] cmsis-dap reset problem From: Chris Fryer - 2013-09-19 16:35:22 On

What are the chipsets for the Lan & video for that MB? this content This should, I think, put an ISO image of the OS onto the thumb drive and not a dmg file. Reset restarts the uC correctly. The largest dedicated Dell Mini and Dell Streak forum.

Reset restarts the uC correctly. I guess you are trying to load OSX onto an 8Gb SSD. For the minute, I'll keep working on trying to get the srst line to work. weblink Try unplugging it and plugging it back in while the error messages are repeating.

Most of my problems were with the image not fitting on my 8Gb USB stick......formatted size was 7.4 Gb....about 100 Mb or so too small. You can unstuck your device by reprogramming it using the mbed.org tools. I > use it with my undergraduate students a lot.

I use the Keil bootloader included in the app note 232 for the FRDM board (usb id c251:f002). - Thomas On Thu, Sep 19, 2013 at 9:33 AM, Spencer Oliver wrote:

using cp "/Volumes//System/Installation/Packages"/OSInstall.mpkg "/Volumes//System/Installation/Packages"/OSInstall.mpkgbak (again notice corrected caps and also correct place for ""s) c) Copy the downloaded one into the I can't see any activity on the reset line during attempted connection. Now you can switch back to the Open-DAP driver. > > mbed.org is pretty neat. Don't be discouraged!

Password General Mac OS X Discussion General Apple and Mac OS X Discussion Welcome to MyDellMini! Please don't fill out this field. I know that there is a way of doing it, just > need to figure out how. > you need to add something like to your config reset_config srst_only srst_nogate However http://lebloggeek.com/read-error/read-error-349-wii.html Home Buyer's Guide Installation Guide Forum Guides Downloads Rules Activity My Dell Mini Forum Blog Forum Wiki Guides Community Today's Posts Search MyDellMini Forum > Operating Systems > Mac OS

Only issue is that of switching over to Windows ... Due to excessive spammer activity, registrations have been disabled. Here's the full command and o/p: chris:~$ openocd -c "interface cmsis-dap" -f target/k10.cfg -c "adapter_khz 40000" -c "cortex_m reset_config srst_only srst_nogate" Open On-Chip Debugger 0.8.0-dev-00186-g7bfb168-dirty (2013-09-16-13:37) Licensed under GNU GPL v2 At least on my Ubuntu 13.04, the BOOTLOADER drive shows up. - Thomas On Thu, Sep 19, 2013 at 9:02 AM, Chris Fryer wrote: > On 19/09/13 15:55, Thomas Schmid

It may take a few attempts but usually works, the object >> is to connect before any code is executed. It may take a few attempts but usually works, the object is to connect before any code is executed. http://www.insanelym...howtopic=219584 Back to top #5 Evgeniy Posted 02 June 2011 - 11:09 AM Evgeniy InsanelyMac Protégé Members 55 posts Yeh Asus X42JV Core i3 350M Intel® HM55 Express NVIDIA GeForce GT Cheers If you would like to refer to this comment somewhere else in this project, copy and paste the following link: Gennady Kozlov - 2006-07-15 status: open --> closed If

As I said, I had a similar error with the external DVD drive and what apparently caused the EBOS Read Error was that it wasn't seeing the DVD drive. You seem to have CSS turned off. Since I am not an expert on OpenOCD internals, and especially within the cortex_a.c module, I was wondering if someone could shed some light on what is the best way to I attached my openocd.cfg file.

After getting it all rebuilt, I put this drive in and got the same error. Sign up for the SourceForge newsletter: I agree to receive quotes, newsletters and other information from sourceforge.net and its partners regarding IT services and products. Register now!